Setting Up NetExtender for Mac OS X: A Step-by-Step Guide

NetExtender, a popular virtual private network (VPN) software, allows users to establish secure connections between their devices and the ZyWALL/USG firewall. In this article, we will guide you through the process of setting up the SSL VPN tunnel on your Mac running OS X.

Step 1: Set Up the SSL VPN Tunnel on the ZyWALL/USG

To begin, log in to your ZyWALL/USG device and navigate to the CONFIGURATION menu. From there, select VPN > SSL VPN > Access Privilege to access the Access Policy section. This is where you will configure the settings for your SSL VPN tunnel.

In this example, we used a USG110 with firmware version ZLD 4.13 and an Apple Mac running OS X10.10 Yosemite. Please note that these are just examples, and you should replace them with your actual network IP addresses and subnet masks.

First, click on the 'Add' button to create a new Access Policy. In the 'Access Policy Name' field, enter a name for your policy, such as 'Mac OS X SSL VPN'. In the 'Description' field, add a brief description of your policy if needed.

Next, select the 'Protocol' dropdown menu and choose 'SSL VPN'. Under 'Server IP Address', enter the IP address of your ZyWALL/USG device. For example, if your device has an IP address of 192.168.1.100, you would enter that here.

In the 'Subnet Mask' field, enter the subnet mask for your network. For example, if your network uses a subnet mask of 255.255.255.0, you would enter that here.

Once you have entered all the necessary information, click on the 'Apply' button to save your changes.

Step 2: Install and Configure NetExtender on Your Mac

Now that you have set up the SSL VPN tunnel on your ZyWALL/USG device, it's time to install and configure NetExtender on your Mac. To do this, follow these steps:

1. Download the NetExtender software from the ZyXEL website.

2. Run the installer file and follow the prompts to install the software.

3. Once installed, launch NetExtender and click on the 'Connect' button.

4. In the 'Server IP Address' field, enter the IP address of your ZyWALL/USG device (the same one you entered in Step 1).

5. Enter your username and password in the respective fields.

6. Click on the 'Connect' button to establish a secure connection between your Mac and the ZyWALL/USG device.

Setting up NetExtender for Mac OS X is a straightforward process that requires minimal technical expertise. By following these steps, you can establish a secure VPN connection between your Mac and the ZyWALL/USG device. Remember to replace any example IP addresses and subnet masks with your actual network settings for optimal performance.

Netextender for mac os x